165C-05 Dixon Valve Brass Compression Fitting - Union Elbow - 5/16

5 (509) · $ 6.00 · In stock

165C-05 Dixon Brass Compression Fitting is a Union Elbow with a 5/16" Tube Size. The fitting is for use with copper, aluminum and Parflex thermoplastic tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration

Advantages:
No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
Specifications:
Reference SAE 060201 BA. Underwriter's Laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.
Assembly Instructions:
Slide nut, then sleeve onto tubing. The thread end of the nut must face out. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder. Assemble nut to body, and tighten hand-tight. Then follow the number of wrench turns as indicated in the table to the right.

Fitting Size	Tube Size	Turns Required to Seal from Hand-Tight
Fitting Size	Tube Size	60C Series with Soft Metal Tubing	60PT Series with Thermoplastic Tubing
2	1/8	1-1/4	-
3	3/16	1-1/4	-
4	1/4	1-1/4	2
5	5/16	1-1/4	2
6	3/8	2-1/4	2
8	1/2	2-1/4	2
10	5/8	2-1/4	2
12	3/4	2-1/4	2
14	7/8	2-1/4	-

Part Number	Tube Size	Material	Weight (Lbs)
165C-02	1/8	Brass	0.0465
165C-03	3/16	Brass	0.0550
165C-04	1/4	Brass	0.0600
165C-05	5/16	Brass	0.0800
165C-06	3/8	Brass	0.0860
165C-07	7/16	Brass	0.1100
165C-08	1/2	Brass	0.1900
165C-10	5/8	Brass	0.2600
165C-12	3/4	Brass	0.5000