Refrigerant Brass Flare Union and Nut Kit – Flobal

Applications: This fitting is designed to connect copper pipes or tubes and comes with 2 nuts. The copper tubing is pushed and expanded at the connection point  (45 degrees) with a flaring tool, then tightly connected to the body surface. This is a flare joint used for airtight applications such as refrigerant piping.
Applications:This fitting is designed to connect copper pipes or tubes and comes with 2 nuts. The copper tubing is pushed and expanded at the connection point  (45 degrees) with a flaring tool, then tightly connected to the body surface.This is a flare joint used for airtight applications such as refrigerant piping.Copper pipe joints for air conditioning to extend copper pipe length. Connects two copper pipes quickly with no welding required. Can be tightened with a wrench.MaterialCadmium-free material [Cadmium (Cd) 75ppm or less]C3604 free-cutting brass barRemarksMaximum working pressure: 7.0MPaNormal working pressure: 4.3 MPaOperating temperature range: -20°C to 150°C (-20°F to 150°F) *Non-freezing

Shop Brass Flare Union Couplings - URI

HQMPC Flare Fittings Brass Tube Fittings 1/2 Flare *1/2NPT Gas

1/4 & 5/16 ID Barbed Swivel Nut Homebrew Kegging Flare Fitting 1/4

Brass Flare Nut - short 1/2

1/2 in. Speed-Y

Brass Flare Fittings

[Material]: Heavy-duty brass,strong and durable,with corrosion resistance,high temperature ductility and low permeability [Features]: Both ends of

1/2 Inch Male Flare x 1/2 Inch Male Flare Connector Gas Adapter Union BrassTube Coupler Pipe Flare Fitting (2PCS)

41FS-8 Dixon Valve Brass SAE 45 deg. Flare Fitting - Short Nut - 1

m.media-/images/I/71DLVi61UZL._AC_UF894

Applications:This fitting is designed to connect copper pipes or tubes and comes with 2 nuts. The copper tubing is pushed and expanded at the

Refrigerant Brass Flare Union Elbow and Nut Kit

Applications:This fitting is designed to connect copper pipes or tubes and comes with 2 nuts. The copper tubing is pushed and expanded at the

Refrigerant Brass Flare Union Elbow and Nut Kit

Hydraulic Fitting Thread Chart

Type: Standard national 3/8 Male Flare thread .for connecting Flared tube on both side. Heavy-duty brass construction with rust proof, Easy to

Brass Tube Coupler Pipe Flare Fitting 3/8 Inch Male Flare x 3/8 Inch Male Flare Union Connector Gas Adapter 2pcs (3/8 x 3/8)

100X3 by Danfoss, Inverted Flare Tube Nut, 3/16 Tube OD