Mold Making Latex Rubber - 1 Gallon - AeroMarine Products
4.9 (464) · $ 28.00 · In stock
AeroMarine Products Liquid Mold Making Latex is natural latex with a solids content between 68 and 70 percent, which minimizes shrinkage and allows the pick up of fine details. It contains ammonia to preserve it. Our latex mold making rubber is tough, flexible, and is resistant to tearing. It is brushed directly onto the pattern, allowed to dry, and then reapplied. This process is continued for 15 to 20 coats until the latex mold has reached the desired thickness. Latex is best for making molds for casting cement, concrete, plaster, hydrocal, or hydrostone. It can be used for limited runs of resin castings, but the yield is low. The 1 gallon size covers 14 square feet at 1/16" thickness. Not for use on Human skin! Not for making masks!
300/11 Epoxy Resin Adhesive - 1/2 Gallon Kit - Aeromarine Products Inc., Epoxy Resin 2 Gallon Kit
✅ EnvironMolds Laytex liquid latex is multi-use liquid rubber. It is used as a mold-making rubber to make flexible and durable latex molds to
EnvironMolds LayTex Liquid Latex Mold Making Rubber 5-Gal
AeroMarine Products
300/21 Laminating Epoxy Resin - 15 Gallon Kit - Aeromarine Products Inc.
Silicone Rubber Mold: Shop RTV Liquid Silicone Rubber for Mold Making
SIMPLE 1-to-1 MIX RATIO: Easy to use! Mix it right every time! HIGH AND LOW TEMPERATURE TOLERANT: With a useful temperature range of -50°F to 500°F,
AM150 High Temperature Potting Silicone Half Gallon Kit
300/11 Epoxy Resin Adhesive - 2 Gallon Kit - Aeromarine Products Inc., Epoxy Resin 2 Gallon Kit
Customer reviews: AeroMarine Liquid Brushable Latex Mold Making Rubber 0.5 gallons
300/11 Epoxy Resin Adhesive - 2 Gallon Kit - Aeromarine Products Inc., Resin Glue
Silicone Mold Making Kit - 1 Gallon Liquid Silicone Rubber 15A with Adjustable Mold Housing - Fast Cured Easy 1:1 Mixing Ratio Silicone Casting for Making DIY Silicone Resin Molds - with Instructions : : Home